Available in 62, 68, 74, and 82 in. widths, Rock Buckets clear unwanted objects from soil. Tines are fully gusseted on each side and interconnected to one another for strength. Skeletal design allows for cutting edge of attachment to always be visible to operator. Buckets are approved for use on Bobcat skid-steer loaders, compact track loaders, all-wheel steer loaders, Toolcat utility work machines, and V417 VersaHandler telescopic tool carrier.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Construction Equipment and Supplies

Search for suppliers of: Rock Buckets | Wheeled Loader Attachments

Featuring one-piece cone design with full sleeve, Expanding Jaw Pulling Eyes allow for protected pulling of duct and innerduct conduit. Expanding jaws help pulling eyes fit firmly into conduit, while sleeve prevents expansion or rupturing of polyethylene conduit during installation/pulling. Made from hardened alloy steel, products have swiveling eye nut for attachment of pulling line and come in sizes capable of accommodating installation of 1.25-14 in. dia polyethylene conduit.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Construction Equipment and Supplies

Search for suppliers of: Cable Pullers | Conduit Rod Pullers

Powered with 8.27 L, EPA Tier 3 emission-certified Komatsu SAA6D114E-3 engine, D65-16 Series pushes with net 205 hp at 1,950 rpm. Standard EX, low ground pressure PX, and wide track WX models are available. EX and WX models can be equipped with SIGMADOZER 7.34 and 7.72 yd³ capacity blades, respectively. Six-way Power Angle Tilt blade is also available. To minimize fuel consumption, dozers feature automatic transmission with lock up torque converter.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Earthmoving Bulldozers

With 5 modes of operation and 53,195-54,405 lb operating weight, tight tail series model PC228USLC-8 is built for operator control and comfort. Excavator is powered by Komatsu SAA6D107E-1 engine and features EPA Tier 3 emissions-certified, electronically controlled HPCR (High Pressure Common Rail) fuel injection system. The 2,865 lb counterweight promotes lift capacity and stability, and variable speed matching technique optimizes performance of engine and hydraulic systems.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Hydraulic Excavators

Suited for all makes and models of overhead lifting equipment, DynAPilot can be integrated into bridge or trolley inverter of crane to provide controlled operation for loads of all types and sizes. System calculates optimal acceleration path using load height information and operator commands to detect and curtail load sway before it happens. By automatically dampening load sway, DynAPilot minimizes likelihood of load mishaps that can lead to production delays and shutdowns.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Crane & Hoist Controls

Power-V XT Extreme Duty snowplow includes 37 in. flared blade wing that maximizes snow discharge. Featuring ½ x 6 in. cutting edges, heavy-duty center section/pushframe, and enclosed high-performance hydraulics, vehicle is available as 8 ft 2 in. XT and 9 ft 2 in. XT. Snowplow also integrates SmartLight 2 with Halogen InfraRed (HIR) bulb that produces whiter light less fatiguing to eyes at night. Light illuminates low/high beam bulbs together during high-beam use for high output.

This story is related to the following:
Construction Equipment and Supplies
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Snow Removal Equipment | Snow Plows | Halogen Lights | Automotive Lights

Suited for small- to mid-sized applications, PC78US-8 is powered by 55 hp Komatsu SAA4D95LE-5 engine and has 16,240 lb operating weight. Machine operating information is sent to secure website via wireless technology for analysis, and 5 working modes enable performance to be tailored to application. In addition to max digging height of 24 ft 11 in., specifications include max digging depth of 15 ft 5 in., arm crowd force of 7,760 lb, and bucket breakout force of 13,780 lb.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Hydraulic Excavators

Featuring fold line down center which supports any corner or angle, FibaTape Composite Corner tape is manufactured with durable PVC, coated with tight-fibered matrix. Drywall tape remains rigid, yet flexible, even when wet, and has holes to promote quick drying. Suited for inside or outside corners, it resists dents, paint chipping, shrinkage, and cracking and is also waterproof and rustproof. Product is available in 2 3/8 in. x 25 ft and 50 ft rolls.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Drywall Tapes

Powered by EPA Tier 3 emission-certified Komatsu SAA6D107E-1 engine, Model GD655-5 features dual-mode power shift transmission, which provides lockup torque converter mode as well as direct drive mode. Engine is positioned at rear of machine for optimal control and has 2-Mode system that allows operator to select economy mode or power mode, depending on work application. Featuring hexangular shape, cab eliminates front corner pillars for optimal visibility.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Earth & Road Graders

Operated manually or pneumatically, Air-Tight Blast Gates utilize 2-part, self-sealing gasket assembly to completely isolate outside air, guaranteeing no air leakage across valve or into atmosphere. Units are manufactured in zinc plate or stainless steel in 2, 3, 4, 6, and 8 in. diameters and can be installed on any dust collection or vacuum system. Available with coil voltages from 24 Vac/dc to 120 Vac or 220 Vac, pneumatic valves operate off air pressures as low as 30 psi.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Blast Gates

With AutoAdjust feature, 3D Trimble® PCS900 monitors height of trailing edge of screed and automatically corrects for errors to achieve smoothness of asphalt mat. Contractor can switch from grade and slope mode to 3D mode, depending on requirements of project. Suitable for mounting on new or used asphalt paving machines, PCS900 can be configured with combination of sonic tracers, slope sensors, averaging beam and contact sensors. All components are IP67-rated to protect against dust and water.

This story is related to the following:
Construction Equipment and Supplies
Controls and Controllers

Search for suppliers of: Paving Equipment | Machine Controls

Offered as conventional tail swing unit in 1.5 ton operating class, Bobcat® 324 has boom cylinder attached to top of boom with cast pivot joints. Max dig depth is 8 ft 6 in., reach at ground level is 14 ft, and dump height clearance is 8 ft 8 in. In addition to hydraulically retractable undercarriage, excavator features 13.9 hp, Tier 4, water-cooled diesel engine and 2 travel speed ranges. Standard dozer blade features 2 self-storing extensions that provide working width of 54 in.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Excavators | Hydraulic Excavators

With standard compaction width of 67 in. and 51 in. offset feature, Model CD54 provides total compaction width of 118 in. Compactor is powered by 4-cylinder Cat® 3054C turbo-charged engine, which provides 99.5 hp at 2,200 rpm and meets U.S. EPA Tier 2 emission requirements. Equipped with front and rear pivoting split drums and 4 steering modes, Model C54 enables 110 in. inside turning radius when fully offset. Applications include highways, city streets, industrial sites, and runways.

This story is related to the following:
Construction Equipment and Supplies
Chemical Processing and Waste Management

Search for suppliers of: Soil Compactors | Construction Compactors | Paving Compactors

Model AP500E has Cat® C4.4, 4-cylinder, turbocharged diesel engine and deck-mounted cooling system that optimizes visibility for operator. Dual swing-out stations include Advisor Monitoring System that provides various monitoring tools. System also includes 25 kW generator, 4 pumps to control its 2 conveyors and 2 augers independently, and position sensor to maintain travel speeds when making turns. Screed options suit work near obstacles or paving of highways/streets.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Paving Equipment | Asphalt Pavers

Featuring high load-carrying capacity, LENTON® THERMO Balcony System is designed to help eliminate damaging effects of thermal bridging, such as cold spots, energy loss, condensation, and mold growth. It can be used in balcony construction, cantilever beams (both concrete and structural steel), and slab-to-wall connections. Modular insulation solution maintains full structural integrity and is easy to install and transport.

This story is related to the following:
Construction Equipment and Supplies
Architectural and Civil Engineering Products

Search for suppliers of: Concrete Reinforcements | Building Insulation

VAST Composite Landscape Pavers, manufactured of up to 95% recycled car tires and plastic containers, are suited for large commercial hardscapes such as parking areas, walkways, building entrances, and plazas. Weighing less than 9 lb/sq ft, they provide high slip resistance and strength. Products include installation grid, with same composite material, that are laid out on compacted sand base on which pavers are automatically spaced and aligned.

This story is related to the following:
Green & Clean
Materials and Material Processing
Construction Equipment and Supplies
Architectural and Civil Engineering Products

Search for suppliers of: Landscaping Materials | Composite Materials | Asphalt Pavers | Stone Pavers

Trimble® GCS900 Grade Control System v11.2 features single point mapping that allows operator to record point information from blade, bucket, or drum focus position. Information is transferred to office over wireless 2-way data synchronization link using Trimble Connected Site(TM). System allows swap between different configurations and offers additional text items/icons on interface. Its remote switch add-on attaches to excavator joystick for point and shoot collection of data points.

This story is related to the following:
Controls and Controllers
Construction Equipment and Supplies

Search for suppliers of: Heavy Duty Truck Controls | Construction Equipment Controls | Industrial Control Systems | Machine Controls

Model LRC-M1 wireless control system for electric overhead travelling (EOT) cranes handles up to 4 motions with 2 ergonomic, multi-axis joystick controllers. Unit includes trolley/hoist selector, 2 auxiliary push buttons, and toggles, all mounted on impact-resistant Lexan EXL® housing. Controller also utilizes external TransKey(TM) RFID configuration for efficient operations, so facilities can minimize spares and transfer keys to other controllers.

This story is related to the following:
Controls and Controllers
Construction Equipment and Supplies

Search for suppliers of: Crane & Hoist Controls | Wireless Controllers | Industrial Controllers

Using GCS900, contractors can port their machine control system components between dozers, graders, excavators, soil compactors, trimmers, paving, and milling machines to meet productivity demands across all types of development projects and all phases of construction life cycle. Automatic control of cutting implement and auto-guidance of machine to road alignment increases quality of graded surface. Cutting depth control can also reduce number of passes required of trimmer.

This story is related to the following:
Construction Equipment and Supplies
Controls and Controllers

Search for suppliers of: Earth & Road Graders | Machine Controls

Enabling assembly of manway risers from 6-36 in. high, Stackable Manway Riser Kits include manway collar for attaching to tank's flange, 2-6 in. high manway rings, safety screen, and lid with latches. Sections screw together, seal securely into each other, and are water and airtight. Made of heavy-duty ABS, 24 in. diameter yellow safety screens are rated at 250 lb/ft² and act as secondary protection should cover be damaged or removed.

This story is related to the following:
Construction Equipment and Supplies

Search for suppliers of: Manhole Risers

Powered by Rss Feed Converter